你在这里

Infoblox 新版NIOS V4.3r5发布

以下是新版本的新功能

  1. 使用V9.6.1 版本的Bind
    Infoblox 的DNS协议引擎基于ISC Bind,此次采用的是V9.6.1。
  2. DHCP漫游主机
    所谓漫游主机就是IP使用动态分配的主机。可以为网络漫游主机如笔记本电脑,手机等创建漫游主机记录。这样每当设备从一个网络漫游到另外一个网络中的时候会分配一个与之前不相同的IP地址。
  3. 安全上传Blox工具箱
    这个版本的NOIS 支持使用SFTP(SSH文件传输协议)安全传送文件。可以同时激活FTP和SFTP服务,使用任意一种协议上传文件。
  4. 允许/拒绝给DHCP客户端派发IP地址
    可以在设备的DHCP派发地址范围允许或者拒绝给已知或者是未知的设备派发IP地址。已知设备可以是漫游主机、固定IP地址的主机或者DHCP的主机记录。未知设备是指没有主机记录,没有固定IP地址记录同时也不属于漫游主机的设备。
  5. 反向解析区域代理
    可以使用添加32位掩码的IPV4方向解析局域代理。
  6. API只指定特定参数查询
    在API中所有支持搜索功能的对象都支持搜索参数返回方法。更详细的信息请查看API手册中的搜索篇章。
  7. 支持更多的MAC地址输入格式, 可以采用以下的几种格式
    • 用冒号隔开的2位一组一共6组的16进制数字如:aa:bb:cc:dd:ee:ff
    • 用”-“号隔开的2位一组一共6组的16进制数字如:aa-bb-cc-dd-ee-ff
    • 用句号隔开的四位一组一共3组的16进制数字如:aabb.ccdd.eeff
    • 用"-"隔开的6位一组一共2组队16进制数字如:aabbcc-ddeeff
    • 没有分隔符号,直接使用8位16进制的数字表示如:aabbccddeeff

以下是英文原文
BIND 9.6.1 Upgrade
The Infoblox DNS protocol engine, based on the ISC BIND (Berkeley Internet Name Domain) software, has been upgraded to version 9.6.1.

DHCP Roaming Hosts
Roaming hosts are hosts with dynamically assigned IP addresses. You can create roaming hosts for network devices such as laptop computers and mobile phones, which require different IP addresses each time they are moved from one network to another.

Secure Upload to bloxTools
The bloxTools environment now supports SFTP (SSH File Transfer Protocol) for secure file transfers. You can enable both the FTP and SFTP services, and then use either one to upload data.

Allow/Deny IP Addresses to DHCP Clients
You can now configure the appliance to assign or deny IP addresses within an address range to known and unknown DHCP clients. Known clients include roaming hosts and clients with fixed addresses or DHCP host entries. Unknown clients include clients that are not roaming hosts and clients that do not have fixed addresses or DHCP host entries.

Delegated Reverse Mapping Zones
You can now add an IPv4 delegated reverse-mapping zone with a netmask of /32.

Parameter Specific Search in the API
In the API, all searchable objects now support the search () argument return_methods. You can perform a parameter specific search by retrieving from the appliance specific fields in any searchable object using the return_methods call variable. For information, refer to the search () section in the Infoblox API Documentation.

Support for Additional MAC Address Formats You can now enter a MAC address using one of the following formats:
aa:bb:cc:dd:ee:ff  Six groups of two hexadecimal digits separated by colons (:)
aa-bb-cc-dd-ee-ff: Six groups of two hexadecimal digits separated by hyphens (-)
aabb.ccdd.eeff: Three groups of four hexadecimal digits separated by periods (.)
aabbcc-ddeeff: Two groups of six hexadecimal digits separated by a hyphen (-)
aabbccddeeff: One group of 12 hexadecimal digits without any separator